|
Build Your Online Product Catalogs?
Product Name: |
silicone rubber for electronic potting
|
Supply Ability: |
8 ton per day |
Related proudcts |
rtv silicone rubber, liquid silicone rubb, |
Specifications |
25KG/DRUM 200KG/DRUM |
Price Term: |
fob |
Port of loading: |
shenzhen |
Minimum Order |
200 |
Unit Price: |
7-8usd per kg |
|
Product Feature of silicone rubber for electronic potting compound HY-9060# is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials. Typical Application of silicone rubber for electronic potting compound HY-9060# is suitable for - high powered electronics, - DC/DC module and circuit board which requires heat dissipation and high temperature resistance. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Technical Parameters of silicone rubber for electronic potting compound Features Part A Part B Before Curing Appearence Gray Fluid White Fluid Viscosisty(25°Ccps) 3000±500 3000±500 Operation features Mixing Ratio 1:1 Viscosisty(after mixing) (cps) 2500~3500 Operating Time(25°C hr) 120 Curing time (min,25°C) 480 Curing time(80°C hr) 20 After Curing Hardness(Shore A) 60±5 Thermal conductivity [W(m·K)] �.8 Dielectric Strength(KV/mm) �5 Permittivity(1.2MHz) 3.0~3.3 Volume Resisivity(Ω·cm) �.0×1016 linear expansibility [m/(m·K)] �.2×10-4 Fire Resistance 94-V0 (Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.) TECHNICAL GUIDELINES of silicone rubber for electronic potting compound 1, Pls put part A and part B in separate container and stir evenly before mixing the two part together. 2, Weight Ratio: part A: part B = 1:1 3, Deaeration the mixture in vacu |
Company: |
hongyejie ltd co***ny
|
Contact: |
Ms. yif gu |
Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
Postcode: |
518117 |
Tel: |
0755-89948294 |
Fax: |
0755-89948030 |
E-mail: |
|
|
|
|